Qinkai FRP/GRP fiberglass fireproof cable tray Cable Trunking

Short Description:

Qinkai FRP/GRP fiberglass fireproof cable tray is to standardize the laying of wires, cables and pipes.

FRP bridge is suitable for laying power cables with voltages below 10kV, as well as control cables, lighting wiring, pneumatic, hydraulic duct cables and other indoor and outdoor overhead cable trenches and tunnels.

FRP bridge has the characteristics of wide application, high strength, light weight, reasonable structure, low cost, long life, strong corrosion resistance, simple construction, flexible wiring, standard installation and beautiful appearance.

Send email to us

Product Detail

Product Tags

Maintenance and repair are convenient.

Due to the low thermal conductivity of the selected material and the addition of flame retardants, the product not only has fire resistance, heat insulation and self-extinguishing properties, but also has high corrosion resistance, light structure, aging resistance, safety and reliability.

It can be easily used with metal bridges, and can be used in strong corrosive environments

such as chemical industry, metallurgy and petroleum, etc.

If you have a purchasing list, please send us inquiry

Application

It can be laid overhead with process pipelines;

hoisted under floors and beams;

side-mounted on indoor and outdoor walls, column walls, tunnels, and cable trench walls, and can also be

installed on open-air columns or piers.

Benefits

When hoisting large multi-layer bridges, I-beam columns should be laid symmetrically on both sides as far as possible.

BHQ series FRP bridges can be laid horizontally and vertically, with corners, T-shaped, cross-shaped branches; adjustable width, height, and diameter.

A fully enclosed cable tray, which is most suitable for laying computer cables, communication cables, thermocouple cables and other control cables of high-sensitivity systems, shielding interference and cable protection in heavy corrosive environments have better effects.

High mechanical strength, it has both the rigidity of metal bridge and the toughness of glass fiber reinforced plastic bridge, good corrosion resistance, strong anti-aging. performance, beautiful appearance, convenient installation and long service life.

Epoxy resin and epoxy resin composite cable tray are suitable for use in strong corrosive environment, large span and heavy load conditions.

Parameter

Qinkai FRP/GRP fiberglass fireproof cable tray parameter

Width	50mm, 100mm, 150mm, 200mm, 300mm,450mm, 600mm, or as you required.
Height	15mm, 50mm, 75mm, 100mm, 150mm ,or as you required.
Length	2000mm, 3000mm, 6000mm, or as you required.
Thickness	0.8mm, 1.0mm, 1.2mm, 1.5mm, 2mm, 2.5mm, 3mm, or as you required.
Raw Materials	DX51D+Z, SPCC , Q235, SS304, SS316, Aluminum
Finish	Pre-galvanized steel Hot Dip Galvanized Stainless steel SS304 Stainless steel SS316 Aluminium Powder Coated