QINKAI WIRE MESH CABLE TRAY ACCESSORIES
Wire Mesh Cable Tray Strengthening Bar
Apply to: Connect 2 straight sections of wire mesh cable tray;Be used to connect the straight sections in the horizontal direction
Fit for: Diameter of wire from 3. 5 mm to 6.0mm
The reinforcing bar kit includes a reinforcing bar, three internal couplers, three M6X20 body bolts and three M6 nuts.
Feature: Very strong connection
Wire Mesh Cable Tray Connor Strengthening Bar
Apply to: Make Tee and Cross connectors,For 90°turns or tee joins in horizontal direction.
Fit for: Diameter of wire from 3. 5mm to 6. 0 mmThe L connector kit includes one connector, two internal connectors, two M6X20 round head square neck bolts and two M6 flange nuts.
Feature: (1) Very strong connection;
(2) Easy to install
Wire Mesh Cable Tray Radian Connector
Apply to: Make Tee and Cross connectors for wire mesh cable trays,The minimum bending of the cable can be ensured for the tee or cross joint in the horizontal direction.
Fit for: Diameter of wire from 3.5 mm to 6. 0 mm
Include:QKPA x l zQKCE25 x 6 ,M6 x 20 Carriage bolt x 6 , M6 Flange nut x 6
Feature: Strong connection,easy to install, beautiful and practical
Wire Mesh Cable Tray Wall Bracket
The wall bracket is a cable tray cantilever bracket from Qinkai Manufacturing.
Compared with L-shaped wall bracket, cantilever bracket is often used for the tray over 300mm to provide a firm supporting.
Used to mount to wall with expansion bolt.
Ensure the distance between the wall
Can be use to construct multi-storey bridge.
Wire Mesh Cable Tray Triangular Wall Bracket
Apply to: Wall mount of wire mesh cable tray
Fit for:Diameter from 3.5 mm to 6.0mm ,Width from 100 mm to 900mm
Weld assembly, used to mount to wall with expansion bolt.
Provide a variety of screw position.Expansion screws can be increased or decrease according to the need.
Matching the arm- length with the width of the wire tray
Wire Mesh Cable Tray Cover
Fit for: Diameter from 3.5 mm to 6.0mm ,all width of trays
Include: Unit x l
Feature: Easy installation
Wire Mesh Cable Tray Seal Plate
Apply to: Terminate trays
Fit for: Diameterfrom 3.5mm to 6.0mm ,all width of trays
Include: Unit x l
Feature: Easy installation
Wire Mesh Cable Tray Bottom Plate
Apply to: protect wires of trays
Fit for: Diameterfrom 3.5mm to 6.0mm ,all width of trays
Include: Unit x l
Feature: Easy installation
Wire Mesh Cable Tray Partition Plate
Apply to: Divide power cables and data cables
Fit for: Diameter from 3.5mm to 6.0mm ,all width of trays
Include: Unit x l
Feature: Easy installation
Parameter
Product Parameter | |
Product type | Wire mesh cable tray / Basket cable tray |
Material | Q235 Carbon Steel/Stainless Steel |
Surface Treatment | Pre-Gal/Electro-Gal/Hot dipped galvanized/Powder coated/Polishing |
Packing method | Pallet |
Width | 50-1000mm |
Side rail height | 15-200mm |
Length | 2000mm,3000mm-6000mm or Customization |
Diameter | 3.0mm,4.0mm,5.0mm,6.0mm |
Color | Silver,yellow,red,orange,pink.. |
If you need know more about Qinkai wire mesh cable tray. Welcome to visit our factory or send us enquiry.